Precipitation extrusion silica gel LS51, LS52
Main characteristics
* Good on roll processing performance, non stick roll, easy on roll, moderate plasticity.
* Good extrusion performance, smooth extrusion and smooth surface.
* Excellent and stable physical and electrical properties.
* Passed ROHS certification, REACH certification, etc.
Main application
* Extrusion hose, strip, etc
Typical product data
| Test Items | Test standard | 5140 | 5150 | 5160 | 5230 | 5240 | 5250 | 5270 | 5280 |
| Appearance | Translucent | Translucent | Translucent | Translucent | Translucent | Translucent | Translucent | Translucent | |
| Density g/cm3 ±0.02 | GB/T 533-2008 | 1.15 | 1.16 | 1.19 | 1.12 | 1.15 | 1.16 | 1.20 | 1.22 |
| Hardness (Shore A) ±5 | GB/T 531.1-2008 | 40 | 50 | 60 | 35 | 40 | 50 | 70 | 80 |
| Tensile strength (MPa) ≥ | GB/T 528-2009 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 |
| Elongation (%)≥ | GB/T 528-2009 | 700 | 600 | 400 | 800 | 700 | 600 | 350 | 300 |
| Tear strength (kN/m) ≥ | GB/T 529-2008 | 15 | 15 | 15 | 15 | 15 | 15 | 15 | 15 |
| Note: 1. Curing condition: 170 ℃ × 5 min, double 25 curing agent, 1.2% addition; 2. The data will be different with different curing agents and different production conditions. 3. The above physical property data are for reference only. If you need the inspection report of the goods, please ask the sales office for it. | |||||||||
Usage and operation
1. Open the mixer for about 3-5 minutes to make the rubber roll and mix evenly.
2. Add the color paste evenly (if necessary), and then add the curing agent. Roll 10 to 15 rolls to make the curing agent evenly dispersed in the rubber, and the rubber surface becomes smooth.
3. Lower the roll and take out the sheet. Separate the two pieces with adhesive tape.
4. If it is hot curing, it is recommended to add bis (2,4-sulfurizer) or platinum sulfurizer. Dosage: 1-1.2% of glue weight. The curing temperature is 170 ℃ - 350 ℃. The specific setting depends on the equipment and extrusion speed.
Safety and storage
* The shelf life of silica gel at room temperature is six months. It is recommended to use it within three months. If it is more than three months, the mixing time of the product will be extended.
* Store in a dry and cool place, away from direct sunlight.
* Keep out of reach of children.
Packing
* Packed in 20kg cartons lined with plastic bags. Please store in a cool place.
Industrial instructions
1. The user is obliged to understand the scope of application and use of the product.
2.Our inspection report is only based on the vulcanization conditions and inspection methods of Dongguan Longsun Material Technology Co., Ltd. It can not be used as the standard of silicone rubber compound products of Dongguan Longsun Material Technology Co., Ltd. and can not be used as the basis for customers to accept the products of Dongguan Longsun Material Technology Co., Ltd.
3. Due to the different production conditions, we can not guarantee that both parties can get the same test results. It is suggested that the data tested under their own test conditions can be used as a reference for performance.
4. Any of the above performance and applicable suggestions are only a reference for the use performance of products of Dongguan Longsun Material Technology Co., Ltd., not a guarantee for the effectiveness or universality of Dongguan Longsun Material Technology Co., Ltd. in specific applications.
5. We reserve the right to change product data without prior notice.
Key words:
Extruded Silicone Rubber
Previous Page
Previous Page
Next Page
More products
Contact Us
Building 1, No. 23, Chashan Weixing Road, Chashan Town, Dongguan City, Guangdong Province, China
Tel: +86-769-82786088
Mobile: +86-18098293536
E-mail: wmdsb@longsunkeji.com
Follow Us
Copyright © 2024 Dongguan Longsun Material Technology Co.,Ltd